I'm new with the 4506 so this may be an obvious problem.
In my case I have one 4506 that I'm using the layer 3 routing option. I'm
trying to send 1 full BGP feed for now for the purposes of testing,
eventually I'll add another to make the excersize meaningful. My problem is
this, when I turn up the session after a few seconds up to a minute the
routes withdraw and when I do a show ip BGP a.b.c.d I see the route entry
and it's indicated to have no path available unaccessible. When the routes
first install they have the path available and work. In parallel, I'm
noticing a series of IP Cef Distributed errors concerning low memory. (no
bgp log messages)
So, am I seeing a limitation in the number of routes I can install? The cpu
shows 512 megs installed, is there a software limit that I'm bumping in to?
The switch is running 12.1-19 ?
Is this a hardware / memory issue or should I check in other areas? What
would make a bgp table full of routes remove once the table is downloaded?
Thank you
Scott
P.S. Sorry if this is a n00by question, the 4506 is a new switch in my lab
and google hasn't yielded me to many usable pointers yet.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
