I have two cisco 6509 chassis with ace and fwsm modules. I have
configured the ace blades to use an internal and external conext. On
ACE-A I am able to bring up both contexts and everything talks just fine
but on ACE-B I can't bring up vlan 138. Is there something I'm missing?
------------------------------------------------------------------------
-----------------------------------------
svclc autostate
svclc multiple-vlan-interfaces
svclc module 7 vlan-group 9706,
firewall autostate
firewall multiple-vlan-interfaces
firewall module 3 vlan-group 9706,
firewall vlan-group 9706
100,120,138,150,190,200,210,235,238,555,575,801-804
firewall vlan-group 9706 999
------------------------------------------------------------------------
-----------------------------------------
ADMIN Context
------------------------------------------------------------------------
-----------------------------------------
ft interface vlan 801
ip address XXX.XXX.XXX.145 255.255.255.252
peer ip address XXX.XXX.XXX.146 255.255.255.252
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 20
ft-interface vlan 801
ft group 1
peer 1
priority 200
associate-context Admin
inservice
context WDS-External
allocate-interface vlan 138
context WDS-Internal
allocate-interface vlan 238
ft group 2
peer 1
priority 200
associate-context WDS-Internal
inservice
ft group 3
peer 1
priority 200
associate-context WDS-External
inservice
------------------------------------------------------------------------
-----------------------------------------
context WDS-External
------------------------------------------------------------------------
-----------------------------------------
interface vlan 138
ip address XXX.XXX.XXX.150 255.255.255.192
alias XXX.XXX.XXX.188 255.255.255.192
peer ip address XXX.XXX.XXX.189 255.255.255.192
access-group input any
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
vlan138 is down, VLAN not assigned from the supervisor
Hardware type is VLAN
MAC address is 00:1f:6c:89:0c:33
Mode : routed
IP address is XXX.XXX.XXX.150 netmask is 255.255.255.192
FT status is standby
Description:not set
MTU: 1500 bytes
Last cleared: never
Alias IP address is XXX.XXX.XXX.188 netmask is 255.255.255.192
Peer IP address is XXX.XXX.XXX.189 Peer IP netmask is 255.255.255.192
Not assigned from the Supervisor, down on Supervisor
Service-policy download failures : 3
0 unicast packets input, 0 bytes
0 multicast, 0 broadcast
0 input errors, 0 unknown, 0 ignored, 0 unicast RPF drops
0 unicast packets output, 0 bytes
0 multicast, 0 broadcast
0 output errors, 0 ignored
------------------------------------------------------------------------
-----------------------------------------
Robert Teller
Washington Dental Service
Network Administrator
(206) 528-2371
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
#########################################################
The information contained in this e-mail and subsequent attachments may be
privileged,
confidential and protected from disclosure. This transmission is intended for
the sole
use of the individual and entity to whom it is addressed. If you are not the
intended
recipient, any dissemination, distribution or copying is strictly prohibited.
If you
think that you have received this message in error, please e-mail the sender at
the above
e-mail address.
#########################################################
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
