Running a 7206XVR with NPE-300. Code 12.0(28)S6.
For what it's worth, the two T1s land on a PA-MC-2T3+. Anyone seen anything similar to this before? I took a quick peek on Cisco's site for anything relevant, but I didn't come up with much. As per usual, browsing the list of bugs managed to freak me out, but I didn't see exactly what I was looking for. router(config-if)#int mu16 router(config-if)#service-policy output Customer_QoS-Colo Service policies on multilink interfaces are not supported router(config-if)#int ser5/1/25:0 router(config-if)#service-policy output Customer_QoS-Colo Serial5/1/25:0 is a member of a multilink/mfr bundle. Please attach the service-policy to the multilink/mfr interface instead. I did sanitize some of this to take out router/customer names, but this is the actual output, if you can believe that. As a side note, this works if I rip one of the T1s out of the MLPPP bundle and apply the policy to the individual serial interface. Does not work -ever- on the Multilink interface, or on an interface part of a multilink group. Thanks, -Ryan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
