Hi all, I am trying to find the right IOS version to use on 7200s w/ NPE-400/NPE-G1 that both support UBR+ and QoS (service policies) on a per-vc basis.
Today we use 12.2(16)B2 to terminate ATM PVCs (from xDSL lines) on these routers, it works fine. But this (old) version lacks QoS support. When testing newer versions (I tried 12.3 & 12.4 mainline, 12.2SB, 12.4T) that could support QoS, we rise an issue with UBR+. Commands are accepted but ignored, and PVCs get configured with UBR at physical linerate. ATM interfaces are PA-A3-OC3MM w/ hardware version 2.0. Which IOS version should we use? Thanks. -- Raphael Bouaziz. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
