Yes, I think that should work, but I only have a 2621 router and it looks like those options are not available on that router/ios. Do you have any other ideas?
Dan. On Sun, Aug 24, 2008 at 12:12 AM, Arie Vayner (avayner) <[EMAIL PROTECTED]> wrote: > Dan, > > Take a look at "Enhanced Object Tracking": > http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_eot. > html > > Arie > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan Letkeman > Sent: Sunday, August 24, 2008 07:27 AM > To: [email protected] > Subject: [c-nsp] route availability > > Hello, > > I currently have a four default routes on a 2621 router that is doing > load balancing to four adsl modems/routers (which are doing NAT). > > ip cef > > ip route 0.0.0.0 0.0.0.0 192.168.11.251 > ip route 0.0.0.0 0.0.0.0 192.168.11.252 > ip route 0.0.0.0 0.0.0.0 192.168.11.253 > ip route 0.0.0.0 0.0.0.0 192.168.11.254 > > This is working for load balancing, but when one of the modems stops > working I basically loose all connection to the internet. What would be > the best way to verify the availability of the next hop? > > Thanks, > Dan. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
