Structured cabling in each rack running back to an mdf cable only rack and then patch tailed into 6500 is a sweet setup as well
-----Original Message----- From: Church, Charles <[EMAIL PROTECTED]> Sent: Thursday, August 28, 2008 11:25 AM To: Drew Weaver <[EMAIL PROTECTED]>; [email protected] <[email protected]> Subject: Re: [c-nsp] Few questions regarding fixed vs modular and when which isbetter. A lot depends on the cabling. Running a few hundred cat5 cables from several racks into one might be a real pain. If each rack of servers can occupy 48 ports or less, and 4948 with 10gig uplinks might be much cleaner. 6513 wouldn't be a good choice regardless, can't put 6700 series blades in some of the slots. Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Weaver Sent: Thursday, August 28, 2008 9:52 AM To: [email protected] Subject: [c-nsp] Few questions regarding fixed vs modular and when which isbetter. What is the 'defacto' top of rack 10/100/1000 48 port access switch most folks are buying up these days from the big C? Does anyone recommend any lower cost 10/100/1000 switches from other vendors that 'work just fine' for this limited purpose? These 48 port switches would just be used to connect machines to VLANs (over uplink/trunks) which are on the distribution/core layer. If you have the right server/client density does it ever make sense to use a 6513 for the l2 connectivity or is it always better to use sep. switches? It seems like using 11 sep. switches would add a lot of management headaches over just having a redundant 6500 (pwr/sup) does anyone have any opinions/advice on this point? Thanks! -Drew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
