Hi Guys,
Shortly I need to replace a FWSM module in a 6500. It is paired with another FWSM module which is now the active module. Looking at this below url it seems to be a straight forward process to replace the module & to get the configuration sync'ed. http://www.cisco.com/en/US/docs/security/fwsm/fwsm22/configuration/guide/upgrade.html#wp1036343 One thing is not clear though. The module that died is usually the primary module, whilst the current active module is in standby.. If I issue the command "Failover" in step 5 after I define the replacement module with all the basic failover variables including the unique variable of *fail lan unit Primary will this cause it to override the configuration in the currently active FWSM with that of the newly installed FWSM? I presume not, although I am not 100 percent sure here.* ** Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
