Hi everyone,
Trying to find a way to access the err-disable status of a port via
SNMP. The only way I've found to do that is to get
CISCO-STACK-MIB::portAdditionalOperStatus.
Unfortunately, the 2960s don't have anything at this OID, even though
they support a bunch of other stuff from the stack mib. For that
matter, neither our 6500s nor 3750s have this value either.
An interface in err-disable has ifAdminStat up, ifOperStat down,
and CISCO-STACK-MIB::portOperStatus other - it seems indistinguishable
from a link that is just down/down.
Has anyone found any clever set of things that indicate an err-disable
Catalyst interface that can be fetched via SNMP?
--
Ross Vandegrift
[EMAIL PROTECTED]
"The good Christian should beware of mathematicians, and all those who
make empty prophecies. The danger already exists that the mathematicians
have made a covenant with the devil to darken the spirit and to confine
man in the bonds of Hell."
--St. Augustine, De Genesi ad Litteram, Book II, xviii, 37
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
