Ben,
Thanks for clarifying that. Just so you know, I tried the 'percent 100'
option but ran into a snag. I'd get this error whenever I tried to
apply the policy to the interface:
cir must fall between 8000 and 154400000 bps
With a little Googling I determined that I had to define an actual
bandwidth value instead of a percent for whatever reason. I changed it
to 3000 and I could then apply the policy. My code is 12.4(9)T1 which
could be the problem. Otherwise that got me up and running. Thanks!
Justin
Ben Steele wrote:
Justin, the shape average is what you are wanting to shape the whole
subinterface to in bps, ie if you wanted to shape it to 1Mb then you would
have shape average 1024000, sometimes a nicer way to do it is just say
"shape average percent 100" which will reference the bandwidth statement on
the interface instead.
You are correct in your second statement that shaping average at 1Mb would
result in 350Kb for a class with 35%
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
