Hi all,
I'm testing out VFI's in a lab, and I've run into the following when I
attempt to add a second VLAN to the VFI instance. The device is
7600/RSP720 running 12.2 SRC1. The VLAN's are connected to the 7600 via
a port-channel interface, physical ports are on a 6748 linecard.
Error:
"Incompatible with the vfi setting configured, checkinterface MTU size
and VLAN ID"
(The spelling error is in the code).
Relevant config (very basic):
== snip ==
vlan 670
name TEST-VLAN-1
!
vlan 671
name TEST-VLAN-2
!
l2 router-id 10.1.1.1
l2 vfi VPLS-TEST-1 manual
vpn id 1
!
interface Vlan670
no ip address
xconnect vfi VPLS-TEST-1
!
interface Vlan671
no ip address
!
== snip ==
When I add the second "xconnect vfi VPLS-TEST-1" statement, I receive
the error.
7600-rsp720(config-if)#interface Vlan671
7600-rsp720(config-if)# no ip address
7600-rsp720(config-if)# xconnect vfi VPLS-TEST-1
Incompatible with the vfi setting configured, checkinterface MTU size
and VLAN ID
7600-rsp720(config-if)#
Documentation is slim on the Cisco site for this, and a search for the
error brings up nothing.
-- Stephen
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
