Hi Jeff, thanks a lot for your response. Then how about BGMP (RFC 3913) ? Is it still a proposed protocol?
Thanks . On 9/1/08, Jeff Tantsura <[EMAIL PROTECTED]> wrote: > > Hi, > > The combination you've described has been working for many years, > very well tested, supported by all major vendors. > PIM (bidir as well) is used for intradomain multicast routing > independently > of interdomain multicast (MSDP/MBGP). > Cisco does support PIM Bidir > > Cheers, > Jeff > > P.S. Best book ever - "Interdomain Mutlicast Routing" by > Edwards/Giuliano/Wright > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > > [EMAIL PROTECTED] On Behalf Of Muarwi > > Sent: maandag 1 september 2008 9:49 > > To: [email protected] > > Subject: [c-nsp] Interdomain Multicast Routing > > > > Hi guys, I'm sorry if my questions is rather out of cisco's things. > > > > I've read books about interdomain multicast routing (also one from cisco > > press). From what I get, the solutions offered is PIM SM - MBGP - MSDP. > > > > My questions is : > > 1. what about using PIM Bidir for interdomain multicast? Is it possible > to > > implement it in Cisco? > > 2. Has BGMP been being implemented in vendors? > > > > Thanks a lot for your response > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
