are you using ES20's? beware of CSCsm61571 --
deejay > -----Original Message----- > From: Liviu Pislaru [mailto:[EMAIL PROTECTED] > Sent: 29 August 2008 08:56 > To: Tomas Daniska > Cc: [email protected] > Subject: Re: [c-nsp] SRB4 (was RE: SRC2?) > > hi, > > i'm running SRB4 on WS-SUP720-3BXL & WS-F6700-DFC3CXL linecards. > > i was running SRB2, hit some BUGs and had to option: > > 1. upgrade to SRB4 > 2. downgrade to SRA7 (change DFC3CXL linecards) > > i went for option 1. and everything is working fine now except my logs > are full of these lines: > > Aug 29 09:45:59 EETDST: %DIAG-SP-3-TEST_SKIPPED: Module 7: > TestFabricFlowControlStatus{ID=33} is skipped > > Aug 29 09:46:01 EETDST: %DIAG-SP-3-TEST_SKIPPED: Module 7: > TestFabricFlowControlStatus{ID=33} is skipped > > > [...] > > 7 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL > SAL09412THT > 8 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL > SAL09368YPZ > [...] > > > > i'm not worried (yet) because cisco says: > > ===================================================================== > > %DIAG-3-TEST_SKIPPED (x1): [chars]: [chars]{ID=[dec]} is skipped > > Explanation: The specified diagnostic test cannot be run. > > Recommended Action: None. Although the test cannot be run, this message > does > not indicate a problem. > > ===================================================================== > > or > > ===================================================================== > > %DIAG-3-TEST_SKIPPED (x0): [chars]: [chars]{ID=[dec]} is skipped > > Explanation: This message indicates that the diagnostic test cannot be > run. > > Recommended Action: No action is required. The system is working > properly. > > ===================================================================== > > but i had to filter these lines from my logs. > > i'm running BGP (full bgp table), MPLS, OSPF, MULTICAST on this router. > so i'm pretty pleased with SRB4 until now. > > -- > liviu. > > On Wed, 2008-08-13 at 14:58 +0200, Tomas Daniska wrote: > > speaking of the releases... is anyone running SRB4 in production yet? > > > > cheers > > > > -- > > > > deejay > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > > > [EMAIL PROTECTED] On Behalf Of Mark Tinka > > > Sent: 13 August 2008 14:04 > > > To: [email protected] > > > Subject: Re: [c-nsp] SRC2? > > > > > > On Tuesday 12 August 2008 23:32:42 Chris Griffin wrote: > > > > > > > Anyone know when 12.2(33)SRC2 is supposed to be released, > > > > specifically for the 7600. I had heard by the end of > > > > July, but so far no release. > > > > > > Same here... heard it was meant to be mid-July, but nothing > > > yet. > > > > > > Having waited this long, it'll come when it comes, I > > > guess :-). > > > > > > Cheers, > > > > > > Mark. > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
