Hey guys,
We currently have a WS-SUP32-GE-3B where the SFP ports are not coming online. Is there a test that can be run from the switch to detect if there is a hardware failure? A sh module indicates that the SUP is ok.. We are thinking about reseating the SUP as it is in hot standby with another identical SUP and then possibly rebooting before lodging a TAC case. Any suggestions welcome :-) Cheers, Aaron. LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
