On Tue, Sep 02, 2008 at 04:53:56PM +0200, Peter Rathlev wrote:
On Tue, 2008-09-02 at 09:09 -0400, Tim Durack wrote:
This is a mystery to me:
I've got a few new VS-S720-10G-3C Sups that work just fine with Kingston 1GB
CF. I've also got some old SUP720-3Bs that refuse to recognise anything
other than Cisco CF. Tried formatting, upgrading rommon (8.5(2)), dd'ing
Cisco flash to Kingston etc. This is under 12.2(33)SXH2 in case it makes a
difference.
Googling around and checking cisco-nsp archives suggest 3rd party flash
should work just fine with the 3B.
Anyone else run into this?
According to the data sheet[1] the Sup720 only supports up to 512MB
flash. We use 512MB cards in a range of 6500s with Sup720 HW-revisions
2.1, 4.3 and 5.2 without problems. Haven't tried 1GB though.
We've got non-Cisco 1Gb cards in 3Bs under SXF and SXH2a - sup hardware
versions are 4.4, rommon 8.1(3)
However we've also had some other 1Gb CF fail, which I think might have
been kingston. We didn't look into it in too much detail, just dropped
back to 512Mb.
Regards,
Peter
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
