tony kam wrote:
Dear all,
Please advise if there is any configuration template to enable both telnet and ssh to have access right into router VTY lines.
Did you try:
line vty 0 4
transport input telnet ssh
The number of vty lines may be different depending on platform and IOS,
for example, "line vty 0 15".
--
Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED]
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
