You can enable sampling if it is not enabled. It should help some. Asad Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Jon Lewis <[EMAIL PROTECTED]> Date: Thu, 11 Sep 2008 11:50:44 To: <[email protected]> Subject: [c-nsp] 6500 netflow export and the switch cpu I've got a 6509 with sup720-3bxl running 12.2(18)SXD7b. It's forwarding several hundred mbit/s across a number of gig ports on WS-X6416-GBIC cards. I've noticed it's gotten very slow at certain things (like write mem), and when looking at the switch (remote command switch show proc cpu), I was kind of shocked to see 85% CPU utilization or higher across all time avgs. The biggest CPU eating process seems to be netflow export 223 2563111984 126342970 20287 38.27% 42.39% 42.03% 0 NDE - IPV4 Other than disabling export or moving traffic off this device, are there things I can do to tone this down? The couple hundred mbit/s this switch is forwarding is supposed to be no big deal for this platform. ---------------------------------------------------------------------- Jon Lewis | I route Senior Network Engineer | therefore you are Atlantic Net | _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
