Hi, I'm wondering if anyone has a working config for a pix 506e running 6.3 or so, to do both site to site and remote access vpn. I assume this is possible?
I have a pix running a few site to sites, however when i added the remote access config, it caused the tunnels to fail leaving them in a state of Xauth config or something of the like (don't have the exact error). Things fail when I add these 2 lines to the crypto map crypto map toCLIENT client configuration address initiate crypto map toCLIENT client authentication LOCAL config is below, thanks. -dalton PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname client-pix domain-name client.logicworks.net fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 no fixup protocol sip 5060 no fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names access-list toCLIENT permit ip host 10.10.1.49 host 205.200.125.1 access-list toCLIENT permit ip host 10.10.1.49 host 205.200.125.2 access-list toCLIENT permit ip host 10.10.1.60 host 205.200.125.1 access-list toCLIENT permit ip host 10.10.1.60 host 205.200.125.2 access-list toCLIENT permit ip host 10.10.1.51 host 205.200.125.1 access-list toCLIENT permit ip host 10.10.1.51 host 205.200.125.2 access-list DENY-NAT permit ip 10.10.1.0 255.255.255.0 10.177.187.0 255.255.255.0 access-list DENY-NAT permit ip host 10.10.1.49 host 205.200.125.1 access-list DENY-NAT permit ip host 10.10.1.49 host 205.200.125.2 access-list DENY-NAT permit ip host 10.10.1.60 host 205.200.125.1 access-list DENY-NAT permit ip host 10.10.1.60 host 205.200.125.2 access-list DENY-NAT permit ip host 10.10.1.51 host 205.200.125.1 access-list DENY-NAT permit ip host 10.10.1.51 host 205.200.125.2 access-list DENY-NAT permit ip 10.10.1.0 255.255.255.0 10.254.10.0 255.255.255.0 access-list splittunnelACL permit ip 10.10.1.0 255.255.255.0 10.254.10.0 255.255.255.0 pager lines 24 logging on logging timestamp logging standby logging console alerts logging monitor alerts logging buffered debugging logging history alerts mtu outside 1500 mtu inside 1500 ip audit info action alarm ip audit attack action alarm ip local pool REMOTEPOOL 10.254.10.10-10.254.10.20 mask 255.255.255.0 pdm history enable arp timeout 14400 nat (inside) 0 access-list DENY-NAT conduit permit ip any any timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local no snmp-server location no snmp-server contact no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set strong esp-3des esp-sha-hmac crypto ipsec transform-set mytrans esp-aes esp-sha-hmac crypto dynamic-map dynmap 10 set transform-set mytrans crypto map toCLIENT 20 ipsec-isakmp crypto map toCLIENT 20 match address toCLIENT crypto map toCLIENT 20 set peer x.x.x.x crypto map toCLIENT 20 set transform-set strong crypto map toCLIENT 999 ipsec-isakmp dynamic dynmap crypto map toCLIENT client configuration address initiate crypto map toCLIENT client authentication LOCAL crypto map toCLIENT interface outside isakmp enable outside isakmp key ******** address x.x.x.x netmask 255.255.255.255 isakmp identity address isakmp policy 8 authentication pre-share isakmp policy 8 encryption 3des isakmp policy 8 hash sha isakmp policy 8 group 2 isakmp policy 8 lifetime 86400 vpngroup client address-pool REMOTEPOOL vpngroup client dns-server x.x.x.x vpngroup client default-domain client.logicworks.net vpngroup client split-tunnel splittunnelACL vpngroup client split-dns logicworks.net vpngroup client idle-time 3600 vpngroup client password ******** vpngroup idle-time idle-time 1800 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
