Thank you.. yes, we have enabled it everywhere.... Basically a pair of 6509's and a pair of 7606's and they all talk back and forth. It's in the "linkage" on the 7606's between BGP and OSPF where the problem seems to lie....;) I can run traceroutes and ping IP's across the internal network no problem....
Best regards, Paul -----Original Message----- From: Gert Doering [mailto:[EMAIL PROTECTED] Sent: September 13, 2008 1:48 PM To: Paul Stewart Cc: [email protected] Subject: Re: [c-nsp] igp / ebgp problem ipv6 Hi, On Sat, Sep 13, 2008 at 01:01:57PM -0400, Paul Stewart wrote: > My problem is that the world can reach our border routers but traffic > will not route beyond the border. Internally, we can route traffic no problem.. Have you turned on IPv6 *forwarding* on the box? You need "ipv6 unicast-routing" - otherwise IOS will speak IPv6 just fine, but not forward packets (behave as an IPv6 Host). gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [EMAIL PROTECTED] fax: +49-89-35655025 [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
