Hi Paul, Take a look at Policy based routing with object tracking.
http://www.cisco.com/en/US/tech/tk364/technologies_configuration_example 09186a0080211f5c.shtml Cheers, Aaron -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Stewart Sent: Thursday, 18 September 2008 10:25 AM To: [email protected] Subject: [c-nsp] Static Route based on next hop reachable Hi there.. This is a bit of a long story .. But what we are looking for is to create a static route only if the next hop is reachable and directly connected. is this possible? I seem to remember there is a way to do this via IP SLA statements where if a condition is met then do X Can anyone enlighten me on this? We have some clients connecting via PPPOE to a 7206VXR but now want to move towards load balancing where the client could connect to multiple devices in a round robin format. The more obvious answer would be to create the routes via Radius but this has proven difficult due to a proprietary system in use to create the radius users file. Thanks, Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
