Should work - they are both 1550 optics. You might need some attenuators on either side. HP says:
"Maximum distance: - 10-70,000 m (singlemode fiber) *Notes* For distances less than 20km, a 10dB attenuator must be used. For distances between 20km and 40km, a 5dB attenuator must be used. Attenuators can be purchased from most cable vendors." Tim:> On Fri, Sep 19, 2008 at 4:24 PM, Fields, Jesse <[EMAIL PROTECTED]>wrote: > Hello, we have a customer with limited funds that has about an eleven mile > fiber run with a Cisco 3750 at one end and a HP 2510-48 at the other. They > would like us to try Cisco ZX fiber module to a HP LH (HP's version of ZX) > fiber module. I know SX - SX works but would like to know if anyone has > successfully gone ZX to LH? > > Thank you. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
