First off, yes, I know. This is an ancient piece of hardware. No, we're not going to use it in production anywhere. Just a few more ports in the lab already installed nicely in a rack.
Yes, it is ancient, so ancient Cisco TAC doesn't seem to want to or is not able to help us with password recovery. But all of the documentation I've found at Cisco and other places says that's what we need to do. The procedure for the "newer" firmware versions (i.e. after 1997 or so) does not seem to work so I'm assuming this is an earlier version that they say requires a call to Cisco. So, am I SOOL, and it's a dumb switch, or is there a way to get in there without Cisco TAC? -- Crist J. Clark [EMAIL PROTECTED] Globalstar Communications (408) 933-4387 B¼information contained in this e-mail message is confidential, intended only for the use of the individual or entity named above. If the reader of this e-mail is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this communication is strictly prohibited. If you have received this e-mail in error, please contact [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
