I'm not aware of the 7206 supporting VPLS (point-to-mulitpoint). They
do supprt EoMPLS, which is a point-to-point design.
--
Christopher Hunt
------------------------------
Message: 5
Date: Sat, 20 Sep 2008 08:39:48 +0500
From: Farhan Ali Khan <[EMAIL PROTECTED]>
Subject: Re: [c-nsp] VPLS and cisco
To: "'MKS'" <[EMAIL PROTECTED]>, [email protected]
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=US-ASCII
7206 and above
Regards
Farhan Ali Khan
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of MKS
Sent: 20 September, 2008 1:56 AM
To: [email protected]
Subject: [c-nsp] VPLS and cisco
Which cisco boxes do VPLS "out of the box" ?
I know about the 7600 uplink line card issues. What about 7200 / 7300
/ ASR / GSR etc.
Is there any combo of hw / sw that runs VPLS sufficiently stable for
an SP and without the mirard of bugs (unlike SRB1/2 for 7600)
regards
MKS
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
