Thanks! When I used the Software Advisor by specifying the hardware platform and two features, it never listed the "Remote Access Server", just "Enterprise Plus". One of the many foibles of the SA.
Frank -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pelle Sent: Sunday, September 21, 2008 6:03 AM To: [email protected] Subject: Re: [c-nsp] Need 2611 image that support DHCP server and PPPoE client runs on 48 MB DRMA/16 MB flash Hi. On Sun, Sep 21, 2008 at 04:57, Frank Bulk <[EMAIL PROTECTED]> wrote: > You would think it would be easy, but I can't find a software load 48 MB or > less that contains both DCHP server AND PPPoE client support. > > Any chance the Software Advisor is wrong and there is such a thing? Feature Navigator (www.cisco.com/go/fn) says that 12.3M with "Remote Access Server" feature set should fit (32M RAM/8M Flash). -- Pelle _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
