If you have not yet looked at the Admin guide, (http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_servi ces/ace_appliances/vA1_7_/configuration/administration/guide/xml.html),
that would be a good place to start. There's at least one example in there. Supposedly the dtd is available off the ACE. The link is in the admin guide as https://ace_ip_address/cisco_ace.dtd or http://ace_ip_address/cisco_ace.dtd. As far as XML samples go, it doesn't appear that there are any out there for public consumption as yet. Vijay Ramcharan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Teller, Robert Sent: September 23, 2008 20:05 To: [email protected] Subject: [c-nsp] Configure Cisco Ace using XML I know it was possible to configure Cisco CSS devices by posting an xml file to them. After migrating from the CSS to the ACE module I will need to do the same thing but I am having problems finding example xml files. Anyone have anything that I could use to get started? Robert Teller Washington Dental Service Network Administrator (206) 528-2371 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ######################################################### The information contained in this e-mail and subsequent attachments may be privileged, confidential and protected from disclosure. This transmission is intended for the sole use of the individual and entity to whom it is addressed. If you are not the intended recipient, any dissemination, distribution or copying is strictly prohibited. If you think that you have received this message in error, please e-mail the sender at the above e-mail address. ######################################################### _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
