Dmitry Kiselev wrote:
Hello!
On Tue, Sep 30, 2008 at 02:55:52PM +0100, David Freedman wrote:
I can tell you I have NVGEN caching enabled on 12.2SXH2a on SUP720
router(config)#parser config ?
cache Cache the configuration
It is a bit dangerous. I have seen invalid runing config output
while parser cache enabled on RSP720 under SRC. It is really
hard to troubleshote such problem. I spend a lot of time...
Then just turn cache off and don't touch the TAC.
AFAIR, issue related to channel members auto-configuration
while configure PAgP parent interface. Or something similar
around missing cache invalidation.
Isn't it turned on by default in relatively new IOS releases? I think
it was added back in 12.3T sometime. It's on by default on my Sup720s
running SRB1. I've never run SX so I don't know when it would have been
added there.
Justin
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
