can you post "show ip bgp vpnv4 rd <rd> x.x.x.x/y" from both PEs ? for the prefix in question?
Dave Mark Tech wrote: > Hi > I have set up a dual homed IP-VPN network between 2 PE's and 2 CE's using > SoO - thas all working fine. I have added an inbound route-map to the 'backup' PE and CE to reduce the local preference in order to make the other PE and CE the preferred gateways. > > CE1--------PE1 primary > | | > CE2--------PE2 backup > > The CE local pref works fine, however on the PE side, local pref doesn't seem > to have any affect, i.e. I have reduced the local pref to 90 on the backup link, however if I check the routing in the backup PE, nothing seems to have changed. Can I just check that local pref actually works across an MP-BGP environment? > > If so I must be doing something wrong > > Regards > > Mark > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
