Hi, > We are doing etherchanel between two a Cisco catalyst 4509 switchs but load > balancing is not working On the one link we have about 700M and on the other > 60M. The configured load balancing method is the default which is > (src-dst-ip). >
the method you need to use to get proper/efficient load balancing is dependant on the traffic and configuration of your network... eg, in this case, if a server is on the network and all clients is on a different network, then as far as the cisco is aware, then all traffic in that scenario will look the same to the load balancer (source IP = server, dest IP = router/gateway address). you'll need to find the best method for your case. alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
