FWIW - FF02::1:2 to UDP/547 is a DHCPv6 solicit (or information request) ... And the ASA probably doesn't have relaying configured (or, atleast, doesn't know where the server is)
HTH /TJ ------Original Message------ From: Jay Hennigan Sender: [EMAIL PROTECTED] To: [email protected] Subject: Re: [c-nsp] Failed to locate egress interface for UDP Sent: Oct 3, 2008 01:28 Bagosi Rómeó wrote: > Hi, > > Anybody ever seen this message: > %ASA-6-110002: Failed to locate egress interface for UDP from > inside:fe80::21f:29ff:fe1c:fa11/546 to ff02::1:2/547 > This message is logged every 2 minutes... You have a Hewlett-Packard device with a MAC address 001f:291c:fa11 that has IPv6 enabled. It is trying to autodiscover its network settings. The ASA is probably not properly set up to handle IPv6. -- Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED] Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Sent from my Verizon Wireless BlackBerry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
