Dear All,

I have been trying to do MPLS L2VPN Over GRE for few days. It is subinterface based l2vpn.

Below goes my Network senario.

------------------------------------------------------------------- OSPF Over GRE Tunnel ..................... ..................... ................................ ... VXR-7200-A ......................................Cisco 2600 ............................. VXR-7200-B .... ......................... ....................... .............................. . dot1q -------------------------------------------------------------------- .dot1q . mpls l2transport route lo VXR -B . mpls l2transport route lo-VXR (route carried by OSPF Through Tunnel) . . . . . . --------------- ----------------- - Cisco 2950 - - Cisco 2950 - ---------------- -------------------- . . . . PC1(192.168.1.1/30) PC2 (192.168.1.2/30)

I am getting a weird problem.* *I can ping the VLAN network across MPLS l2vpn i.e from PC1 to PC2 for about 5 to 7 minutes and it *stops automatically* and ever comes up back.

Everything else seems OK. mpls ldp neighbor, mpls forwarding database, VCs status, GRE Tunnels, OSPF routes are all Ok even when i am unable to ping PCs.

I am using Cisco IOS 12.4-2(T) on the VXRs. Is there any BUG for Cisco IOS i am using. If so, please suggest me the bug free IOS for its implamentation. 'debug mpls l2trasport packets error' showed error report of "*ATOM-Eth VLAN imposition: in Nu0, ciruit id 110 size 68 packet dropped, Fixup fauled*". But this report persists even when when i am able to ping PC1 to PC2 (for 5 to 7 minutes)

My MPLS L2VPN is sub-interface based.

Any help in this regards  is highly appreciable.

_*Configuration detals.*_


*                                          _At VXR-7200-A_
*mpls ip*
*mpls label protocol ldp
mpls ldp router-id loopback 0

interface Loopback0
ip address 172.22.0.129 255.255.255.255
ip ospf 1 area 20
!
interface Tunnel0
description #### GRE Tunnel ####
ip address 172.22.15.129 255.255.255.252
ip ospf cost 100
ip ospf 1 area 20
mpls label protocol ldp
mpls ip
tunnel source FastEthernet1/0
tunnel destination 202.70.75.165

Interface fa 1/0
des ### Connected To Cisco 2600 ####
ip address 202.70.77.14 255.255.255.248

Interface fa 1/1.110
des ### Connected Cisco Switch ###
encap dot1q 110
mpls l2transport route 172.22.16.1 110

ip route 202.70.75.164 255.255.255.252 202.70.77.9



                        *_At VXR-7200-B_

*mpls ip*
*mpls label protocol ldp
mpls ldp router-id loopback 0

interface Loopback0
ip address 172.22.16.1 255.255.255.255
ip ospf 1 area 20
!
interface Tunnel0
description #### GRE Tunnel  ####
ip address 172.22.15.130 255.255.255.252
ip ospf cost 100
ip ospf 1 area 20
mpls label protocol ldp
mpls ip
tunnel source FastEthernet1/1
tunnel destination 202.70.77.14
!
interface FastEthernet 1/1
description **** Connected To Cisco 2600 ****
ip address 202.70.75.165 255.255.255.248
ip route-cache flow
duplex full
no cdp enable
!
!
interface FastEthernet1/0.110
des ### Connected To Cisco Switch Below ###
encapsulation dot1Q 90
mpls l2transport route 172.22.0.129 110

ip route 202.70.77.8 255.255.255.248  202.70.75.166


_*        At Cisco 2600       *_

interface FastEthernet 1/1
description **** Connected To VXR-7200-A ****
ip address 202.70.77.9 255.255.255.248

interface FastEthernet 0/0
description **** Connected To VXR-7200-B ****
ip address 202.70.75.166 255.255.255.252


Regards,
Khara Nanda Luitel
Subisu Cable Net Pvt Ltd
Nepal.
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to