Anyone help me understand why I can't NAT the same address in two different VRFS according to the config below;
!! ip cef ! ip vrf one rd 1:1 route-target export 1:1 route-target import 1:1 ! ip vrf two rd 2:2 route-target export 2:2 route-target import 2:2 ! interface FastEthernet0/0 no ip address ! interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip vrf forwarding one ip address 10.0.0.1 255.0.0.0 ip nat inside no snmp trap link-status ! interface FastEthernet0/0.2 encapsulation dot1Q 2 ip vrf forwarding two ip address 10.0.0.1 255.0.0.0 ip nat inside no snmp trap link-status ! interface FastEthernet0/1 no ip address ! interface FastEthernet0/1.1 encapsulation dot1Q 1 native ip vrf forwarding one ip address 217.0.0.1 255.0.0.0 ip nat outside no snmp trap link-status ! interface FastEthernet0/1.2 encapsulation dot1Q 2 ip vrf forwarding two ip address 217.0.0.1 255.0.0.0 ip nat outside no snmp trap link-status ! ip nat source static 217.1.1.1 10.0.0.5 vrf one ! Router(config)#ip nat source static 217.1.1.1 10.0.0.5 vrf two % 217.1.1.1 already mapped (217.1.1.1 -> 10.0.0.5) Router(config)# Thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
