On Wed, Oct 15, 2008 at 05:22:33PM +1100, Andy Saykao wrote: > What I've found is that when I debug radius no Framed-Route and > Framed-IP-Address are being sent in the start packet of the radius > accounting packet. When I reload the 7301 with an IOS we use in > production (12.3(14)T7) , the Framed-Route and Framed-IP-Address are > included in the start packet. Is this the desired behaviour of the SB > release???
> If I remove the cisco-avpair lines referring to the set up of the VRF > details for the session from the flat file, the Framed-IP-Address shows > up in the radius accounting packet. Given that the debug looks ok when > using a different IOS, I'm starting to believe that has something to do > with the SB release. The fact that you are getting Framed-IP-Address/Route when you don't return the vrf config problably answers my next question, but anyway... delay-start configured (or does it default to it on either version?)? http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_frame_rte.html "The Framed-Route information is returned in Stop and Interim accounting records and in Start accounting records when accounting Delay-Start is configured." > I've spent all day looking for answers but can't find any. I'm just not > sure when using the SB release why the start packet would not include > these two attributes and if it really matters? Hope somebody can help. That you get it in the stop is re-assuring ;-) At least an indication that it thinks it was using it. -- Euan Galloway _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
