On Thu, 2008-10-16 at 13:59 +0800, cc loo wrote: > Im recently stuck in a configuration with a 2800s ISR with a HWIC-16a > plugged in . > An octal cable was plugged in, and afew ports were tested. <cut> > When i proceed to telnet 172.21.1.1 at port 2002, a login screen of this > router (2800) appears. (seems to indicate the port is working?). > However after typing my username and password and hit enter , the session > froze (seems like console port has no response?)
What's at the other end of your octopus cable? If it's not connected to anything you'd get exactly what you tell: A login screen, but nothing afterwards. Otherwise a "show line" can give you information on the lines themselves. TTY speed of the line must match what is in the other end of course. Same with parity and so on. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
