On Wed, Oct 22, 2008 at 3:04 PM, Nathan <[EMAIL PROTECTED]> wrote: > On Wed, Oct 22, 2008 at 1:57 PM, Eric Kagan wrote: >> Just a thought - did you try 'atm route-bridged ip' on the atm >> sub-interfaces ? I just had to add this to a recent config in order for >> layer 3 to work. > > I took it OUT, and the bridge started working.
Correction, the VLAN 1 (untagged packets) started working. 802.1q tagged packets don't go through. Why?! I can't believe this isn't simple! I just want to change the PVC on the [expletive] ATM cells and push them back the same way they came, how can that be so difficult? Is it possible on a 7200 to take packets arriving on a PA-A3 PVC and send them back out again? Either the raw ATM packets with just the PVC changed, or else aal5snap-encapsulated 802.1q-tagged ARP and IP packets ? If it is not possible, what are my options? Try to stack the vlans under vlan 1?? Change the 870 routers for something that can do L2TP ? -- Thanks, Nathan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
