On Fri, Oct 24, 2008 at 5:24 PM, Bruce Robertson <[EMAIL PROTECTED]> wrote: > If I remember correctly, the 1751 supports L2TPv3. You could add another > Ethernet interface to the 1751 (the WIC-4ESW is handy for that, or > WIC-1ENET), insert it between the 871 and customer, and bridge the Ethernets > through, without killing MTU.
Sounds doable. So with a 1751, I should be able to do an xconnect on each of my two interfaces, and thereby string two L2TPv3 pseudowires beteen my sites? With two 1751s I don't suppose I'll need the 871s though (my need is connecting LANs site A - my871 - ethernet - ethernet2ATMconverter - ATM - 7200 - ATM - ethernet2ATMconverter - ethernet - my871 - LANs site B, where the LANs are currently two untagged RJ45s on each side but could be a single RJ45 with a dot1q trunk). In your opinion, no way of doing it with L2TP on my 871s? -- Thanks for your help, Nathan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
