Hello, Le 27 oct. 08 à 04:35, a. rahman isnaini r.sutan a écrit :
ro#sh int g1/0 1090542525 packets input, 87373962 bytes, 39 no buffer Received 176544249 broadcasts, 0 runts, 0 giants, 2079 throttles0 input errors, 542 CRC, (Check this) 0 frame, 134 overrun, 0 ignoredclearing interface : CRC should be 0. ro#clear counters ro#sh int g1/0 15240 packets input, 9343716 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored ro#sh int g1/0 25278 packets input, 14733654 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored a. rahman isnaini rangkayo sutan
Seems you have (had?) some trouble either : - with a faulty cable - with a faulty nicIf you have setup flow control, try to switch it off for a couple of time...
If you still have counter on "no buffer" then you have a problem... (switch problem ?), but if you have no error at all but still packet loss on the specified machine, then you should check the machine itself :
- enougth cpu power ? - raise tcp / udp buffer ? - add ram - stop some application... - change the nic (use intel one, instead of realtek, broadcom, ....) - change OS... (this only if you handle looooooots of small packets...) Sincerly, /Xavier
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
