> On Thu, 2008-11-06 at 22:20 +0100, Peter Rathlev wrote: > > > 1067610 packets input, 920823086 bytes, 0 no buffer > > > Received 0 broadcasts (0 multicasts) > > > 0 runts, 0 giants, 0 throttles > > > 980 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored > <cut> > > > I have googled around a bit, looked on Cisco's site, and everything > > > says that the input error counter is just the combined count of the > > > other counters like CRC, overrun, and so on, but they are all 0 for > > > me.. > > > > > > Any clues on where to look or what would cause this??? > > Also "show interface Fa9/48 counters errors" gives you a couple more > counters to gaze at. :-) > > Regards, > Peter
Thanks Peter, I knew I had looked at show interface Fa9/48 counters, but not the show interface Fa9/48 counters errors command. Actually doing that shows me: #show interface Fa9/48 counters errors Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards Fa9/48 42994 0 0 42994 0 0 Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen Runts Giants Fa9/48 0 0 0 0 0 0 0 Port SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err Symbol-Err Fa9/48 0 0 0 0 0 So Align-Err is the issue, of course a quick look for that seems to indicate a hardware issue, but heck we replaced the various components and still have the issue. So still stumped at this point.. --- Howard Leadmon _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
