>What about if you do "show cef linecard" does it show cef as being active
for the linecards that support the physical interfaces that you are binding
to >a MLPPP group?
>
>I noticed alot of cef oddities on the 75xx platform with vip's not having
sufficient memory (usually needed 128MB to maintain a normal cef table).
core-ar1#show diagbus | inc Mem
Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
Controller Memory Size: 128 MBytes DRAM, 4096 KBytes SRAM
Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
Controller Memory Size: 128 MBytes DRAM, 8192 Kbytes SRAM
Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
Controller Memory Size: 128 MBytes DRAM, 8192 KBytes SRAM
Looks good to me. The card in Slot 4 reporting 4096 SRAM is a Fast Ethernet
card.
core-ar1#show cef linecard
Slot XDRSent Flags
5 291330 up
0 291342 up
9 291512 up
11 291965 up
12 291530 up
4 291519 up
*7 288598 up
VRF IPv4:Default-IP-Routing-Table, 112874 routes
Slot I/Fs State Flags
5 5 Active sync, table-up
0 8 Active sync, table-up
9 5 Active sync, table-up
11 32 Active sync, table-up
12 9 Active sync, table-up
4 6 Active sync, table-up
7 5 Active sync, table-up
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
