i checked it and it configured to be 1500 (in face if u keep the mtu size on the atm sub interface the default 4470 , the xconnect will never come up)
Date: Mon, 10 Nov 2008 22:27:50 -0800 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [c-nsp] L2VPN Interworking CC: [email protected] Check for MTU size on interfaces. Regards Hitesh Vinzoda On 11/10/08, Mohammad Khalil <[EMAIL PROTECTED]> wrote: Dears i have the following setup: CE1 --> PE1 --> MPLS Cloud --> PE2 --> CE2 PE1 is 7609 and has the IOS image c7600rsp72043-advipservices-mz.122-33.SRD.bin PE2 is a VXR G2 and has the IOS image c7200p-spservicesk9-mz.122-33.SRC1.bin CE1 --> PE1 is ATM connection CE2 --> PE2 Vlan connection (Sub interface) i have established xconnect between the 2 sides the xconnect is up and there is a ping between the 2 sides but the problem is in the size when i issue the command ping x.x.x.x repeat 1000 size 1500 i face remarkable packet drop !! any ideas ?? knowing that there is no congestion at all in my links nor through the MPLS cloud _________________________________________________________________ News, entertainment and everything you care about at Live.com. Get it now! http://www.live.com/getstarted.aspx _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _________________________________________________________________ Explore the seven wonders of the world http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
