Best is to check "show ip cef internal" to see if the packets are load balanced.
Afaik, IOS does not load balance between labelled and unlabelled paths. (Think about sending AToM or MPLS VPN traffic out towards an unlabelled path.) --- On Tue, 25/11/08, Marlon Duksa <[EMAIL PROTECTED]> wrote: From: Marlon Duksa <[EMAIL PROTECTED]> Subject: [c-nsp] mpls/ip load balancing To: "[email protected]" <[email protected]> Date: Tuesday, 25 November, 2008, 5:19 AM Hi - does anyone know how load balancing by default works over two paths, one using MPLS and the other one IP. I have the same route advertisement received over two different interfaces. On one interface LDP is enabled (and of course OSPF), the other interface is only OSPF enabled. Traffic is definitely load balanced across the two interfaces, but I was wondering what fields the hashing is based on? Thanks, Marlon _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
