Dan, Take a look at EEM: http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_eem_o verview_ps6441_TSD_Products_Configuration_Guide_Chapter.html
You can monitor things like counters (crc etc) and other more advanced things, and act when something is wrong. Take a look, and let me know if you need further info. Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Letkeman Sent: Wednesday, November 26, 2008 02:02 AM To: cisco_nsp Subject: [c-nsp] IP Sla Configuration Hello, I have 5 different route's on our 2821 router and I'm running IP SLA to dynamically remove routes if they are down. The problem is that when I monitor the address of the device, but the link is up but flaky it still responds and does not remove the route. The device i'm monitoring is an 827 router with an adsl connection. Is there a better way to configure it that what I have done? ip sla 1 icmp-echo *.*.56.144 timeout 3000 frequency 5 ip sla schedule 1 life forever start-time now ip route 0.0.0.0 0.0.0.0 192.168.11.101 track 1 track 1 ip sla 1 reachability Thanks, Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
