Hm, are the servers configured in some kind of active/failover or somesuch? I vaguely remember the default Windows method of "failover" causing no end of trouble to default-configured Cisco switches as MAC addresses pingpong between ports..
Adrian On Wed, Nov 26, 2008, Vigar, Damien wrote: > Hi all, > > We are experiencing an issue with Windows 2003R2 servers connected to our > 3560/3750 switches via a 1000T SFP GBIC. The servers appear to hang, > responding to a ping but not to anything else. It looks to us like an issue > with the servers, but our server administrator insists that it must be the > GBIC/switch combination. > > We've put the servers in question back onto fast ethernet ports, and haven't > seen any problems in the meantime. Other sites' servers are running fine on > the same GBIC/switch combination. > > We've tried to find anything relating to this issue online, with no luck. Any > ideas on where to go next? > > > Cheers, > > Damien > > > ********************************************************************** > This message is intended for the addressee named and may contain > privileged information or confidential information or both. If you > are not the intended recipient please delete it and notify the sender. > ********************************************************************** > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support - - $25/pm entry-level VPSes w/ capped bandwidth charges available in WA - _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
