If you use SecureCRT, it's very easy. Just log the output to a file and run a script like this one:
++++++++++++++++++++++++ #$language = "VBScript" #$interface = "1.0" Sub Main do crt.Screen.Send "sh interface x/y" & VbCr crt.Sleep 60000 loop End Sub ++++++++++++++++++++++++ The crt.Sleep value is in msec. Regards, Antonio Soares, CCIE #18473 (R&S) [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of chloe K Sent: quarta-feira, 26 de Novembro de 2008 12:56 To: [email protected] Subject: [c-nsp] any way to check the cisco interface to output to file Hi I realize there is dropping packet in router. Is there any way to check cisco interface to output to file? I want to record every minutes Thank you --------------------------------- Now with a new friend-happy design! Try the new Yahoo! Canada Messenger _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
