If i remember right, SE3 solves it ;)
--
Tassos
Mark Tinka wrote on 26/11/2008 07:54:
On Wednesday 26 November 2008 13:20:36 Garry wrote:
we're running several 3560G's, a couple with a relatively
old 12.2(25), some with the newer (35). I have one or two
features that I know have been added since 25 and are
available with (35), so I would prefer to upgrade at
least to that, which I know has run flawlessly for a year
or so ... question is - should I dare to upgrade to a
more recent version, or are there any issues known? Also,
is there a list of features that have been added in the
respective sub-releases, in order to decide whether I
even need a newer version than what I know to work?
We've been happy with 12.2(44)SE2; but admittedly, we only
use our 3560G's as Layer 2 devices.
There's a known cosmetic issue with this release:
#sh ver | i memory
cisco WS-C3560G-48TS (PowerPC405) processor (revision D0)
with 0K/8184K bytes of memory.
^^^^^^^^
512K bytes of flash-simulated non-volatile configuration
memory.
#
Other than that, we've had no real issues to report.
You probably want to take a look at the release notes for
more current revisions to see if there's anything you like,
or don't like.
Mark.
------------------------------------------------------------------------
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
