Hi, I guess you have only one side of the VPN using a dynamic IP, while the hub site is a pre-defined IP address. Right?
For this you can take a look at Easy VPN (EzVPN) http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635 /ps6659/data_sheet_c78-457320.html http://www.cisco.com/en/US/products/sw/secursw/ps5299/index.html http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_e xample09186a0080808395.shtml Another option could be DMVPN: http://www.cisco.com/en/US/products/ps6658/index.html http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635 /ps6658/data_sheet_c78-468520.html (you can disable branch to branch direct communication by tweaking the NHRP config) Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zorg 421 Sent: Friday, December 05, 2008 12:56 PM To: [email protected] Subject: [c-nsp] site2site VPN with a dynamic IP Hello c-nsp, How can I setup cisco devices (preferably IOS) to establish a site2site IPSec VPN with one endpoint on a dynamic IP? I prefer using pre-shared key, but any idea is welcome. Regards. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
