On (2008-12-04 23:04 +0100), Daniel Roesen wrote: > On Thu, Dec 04, 2008 at 04:17:58PM -0500, Mojtaba Kia wrote: > > Attempting to install a SFP-GE-T transceiver on an ASR1002 router's built-in > > GE port. The lead time to get Factory SFPs from Cisco is about 2-3 weeks, > > got my hand on couple of third-party vendor SFP-GE-T transceivers and even > > though the router recognize the SFP , layer and II will not come up. > > We've seen the same here with 3rd party Copper SFPs, and "service > unsupported-transceiver" didn't help. Box didn't actually complain about > that anyway. > > No problems with "Cisco" quad-price SFPs though. Perhaps they found a > new way to recognize 3rd party Cisco-coded SFPs... no clue. > > The same 3rd party brand fiber SFPs have no issues.
There are two types of cu-SFP from Cisco also, both work in say 7600/LAN cards, but only one of them work in SIP/SPA, ES20. I'm really curious what is the difference. I remember hearing something about SGMII standard and non-standard port-asics. -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
