My understanding is that netflow export has been available since Sup1 PFC1.
However, if you are coming from a "router" platform you are in for a few surprises. If you want to do per-interface netflow (i.e. specify the L3 interfaces you want to get data for) then you need to be running SXH. There are several CCO documents that either hint or state that it supports per-interface on any SX code but that's not the case. A recent TAC case has had some of those documents removed from Cisco's web site.
And running SXH sounds like a barrel of laughs from all reports. We have netflow export configured on Sup720 / SXF boxes and doing a lot of post-processing to get rid of the data we don't want.
David ... On 01/12/2008, at 5:36 AM, [EMAIL PROTECTED] wrote:
Hello, Which supervisors has support for Netflow on the 6500 series? SUP2? SUP32? SUP720? /Jonas _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
