Hi, Can anyone offer me advice on configuring CoPP on internet-facing edge routers?
I'm running 12.4(21a) on 7200VXR's. I have an initial configuration with the usual well documented classifications (http://www.cisco.com/web/about/security/intelligence/coppwp_gs.html) and can access the proper values (I think)from CISCO-CLASS-BASED-QOS-MIB, which I could graph in MRTG without too much difficulty. Heres the output from 'sh policy-map control-plane': sh policy-map control-plane | include offered 5 minute offered rate 0 bps, drop rate 0 bps 5 minute offered rate 1000 bps 5 minute offered rate 2000 bps 5 minute offered rate 0 bps 5 minute offered rate 0 bps 5 minute offered rate 1000 bps 5 minute offered rate 0 bps, drop rate 0 bps These values are 'bursty' and seem to come in multiples of 1000. Is there any merit in graphing these values over time and setting CoPP MQC values from that? It feels a bit crude. Thanks, Mark Mark Tohill UTV Internet T:+44 (0)28 90 262196 M:+44 (0)7786 278716 E:[EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
