Maybe give storm-control with pps keyword a try. http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/1 2.2_25_see/configuration/guide/swtrafc.html#wp1241484
Regards, Luan Nguyen Chesapeake NetCraftsmen, LLC. www.NetCraftsmen.net -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Primoz Jeroncic Sent: Wednesday, December 17, 2008 10:01 AM To: Cisco Mailing list Subject: [c-nsp] Rate limiting but on packet count not bandwidth Hi guys Does anyone have any idea if rate limiting traffic based on packet count would be possible on Cat3550/3560/3570 or any Cisco router? I would need to limit some users which don't generate much of traffic (only about 5 or 6Mbps), but packet count is huge (30k+ per sec). So is there some option to limit their fraffic to let's say 5000packets/sec regardless on bandwidth they use? Thanks for help. Have fun, Primoz Jeroncic Support - IP Connectivity & Routing ------------------------------------------------------------------- Softnet d.o.o. tel: +386 1 562 31 40 | Borovec 2 fax: +386 1 562 18 55 | 1 + 1 = 3 1236 Trzin primoz(at)softnet.si | for larger values of 1 Slovenija http://flea.softnet.si/ ------------------------------------------------------------------- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
