12.2(50)SE will have IPv6 support for the ME-3400/3400E series. -----Original Message----- From: Clement Cavadore [mailto:[email protected]] Sent: Monday, January 12, 2009 9:52 AM To: [email protected] Subject: [c-nsp] ME3400 & IPv6
Hi folks, I have read on cisco website that ME3400 is not supposed to support IPv6. However, using the last IOS, 12.2(25)SEG3 METROIPACCESS on my lab, I can notice that there are some (basic) IPv6 commands. I can configure ipv6 addresses to the interfaces, have a working inbound telnet in v6, a working traceroute ipv6 to the outside world using a default ::/0 ipv6 route, access lists, etc.. but I didn't manage to get a real (static) routing through the ME (and there is no "ipv6 router ospf XXX"). Am I forgetting a magic config key, such as "ipv6 unicast-routing" (which does not seems to exist) Here is what a debug ipv6 packets gives me when I try to configure a static routing through the ME: *Mar 1 05:30:32.682: IPV6: source 2A01:290:800:6970::2 (GigabitEthernet0/2) *Mar 1 05:30:32.682: dest 2001:7A8:800:FFFF::1 (GigabitEthernet0/1) *Mar 1 05:30:32.682: traffic class 0, flow 0x0, len 104+14, prot 58, hops 64, not a router? It seems that the ME "knows" what to do with the packet, but... Am I missing something ? FYI, both of the ports have been tried as "nni" or "uni". Thanks, -- Clément Cavadore _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
