Hi, I think you shud check if policing input is supported or not ? Else try Rate-limiting interface inbound..
regards, Gaurav ------------------ Message: 1 Date: Thu, 15 Jan 2009 16:21:07 -0800 From: "Leslie Meade" <[email protected]> Subject: [c-nsp] QOS VLAN To: "cisco-nsp" <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="utf-8" I have a 6509e with a sup 32, and I want to control how much bandwidth is available to each vlan. My uploading is working fine but I do not know understand why my users on this vlan or any vlan still pulls down lots of data. I have been told that I cannot do this because the equipment is not suited to my needs. This is what I have policy-map 4_Mb_Internet class class-default police cir 4194000 bc 491515 be 491515 conform-action transmit exceed-action drop violate-action drop interface Vlan4 description 2012 Camera Feed ip address 10.1.4.2 255.255.255.0 ip access-group Productions in ip helper-address 10.1.6.10 no ip redirects no ip unreachables ip flow ingress ip route-cache flow no ip mroute-cache mls netflow sampling standby 15 ip 10.1.4.1 standby 15 priority 250 standby 15 preempt service-policy input 4_Mb_Internet service-policy output 4_Mb_Internet Any one point me in the right direction Leslie Save our Earth Check out the all-new Messenger 9.0! Go to http://in.messenger.yahoo.com/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
